Esme Hyda

Introducing the EQx Esme Hyda – an exclusive collaboration between EQx and renowned equestrian content creator Esme Higgs, better known as This Esme.

Designed for riders who want exceptional safety without compromising on style, the Esme Hyda brings Esme's signature classy, sophisticated aesthetic to the next generation of dial-fit riding helmets from EQx by Charles Owen.

Available exclusively through Charles Owen and Redpost Equestrian, this special edition is available in two elegant colourways, Navy and Black. Combining a contemporary matte shell with a contrasting gloss top cap, the Esme Hyda features a beautiful tonal glitter crown and coordinating badges, creating an understated sparkle that perfectly captures Esme's signature style.

Thoughtful finishing touches elevate the design further, including a premium padded leather-look chin strap cover embossed with Esme branding, an exclusive This Esme branded pin on the harness and a tonal glitter EQx badge at the rear of the helmet. Every detail has been carefully considered to create a sophisticated, coordinated look.

Beneath its stylish exterior, the Esme Hyda delivers the same trusted protection and innovative design as the original Hyda. Featuring a distinctive crown design and enhanced ventilation, the Hyda combines a modern, lightweight profile with comfort and performance. Its precision dial-fit system allows riders to achieve a secure, personalised fit, while the carefully engineered ventilation supports airflow throughout the ride.

Certified to three international equestrian safety standards, EN 1384:2023, PAS 015:2011 and ASTM F1163-23, the Esme Hyda is available in both Mips® and non-Mips versions, with Mips technology.

Whether you're training at home, competing or heading out for a day in the saddle, the Esme Hyda delivers confidence-inspiring protection with signature Esme style.

Key Features

• Designed in collaboration with Esme Higgs

• Exclusive to Charles Owen and Redpost Equestrian

• Available in two elegant colourways: Navy and Black

• Contemporary matte shell with contrasting gloss top cap

• Tonal glitter crown and coordinating badges for understated sparkle

• Available in both Mips® and non-Mips versions

• Lightweight, modern Hyda shell with enhanced ventilation

• Precision dial-fit system for a secure, personalised fit

• Exclusive This Esme branded harness pin

• Tonal glitter EQx rear helmet badge

• Premium padded leather-look chin strap cover with embossed Esme branding

• Certified to EN 1384:2023, PAS 015:2011 and ASTM F1163-23

• Available in three sizes: Small (52–55 cm), Medium (55–58 cm) and Large (58–61 cm)

How to fit:

1. Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting. Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.

2. Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.

3. Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.

4. The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat. One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.

5. Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.

This helmet provides a standard depth fit for any head shape using a dial-fit system.

Follow our fitting guide if you are unsure of your helmet fit and head shape.

Contact our friendly customer services team with any queries.

This helmet features a removable headband which can be handwashed and left to air dry.

Helmets should be stored at ambient temperature out of direct sunlight. Never leave your hat in a hot car or in direct sunlight. This helmet is designed to absorb some for the energy of a blow by partial destruction of the shell or protective padding material or both.

This damage may not be visible and therefore any helmet which suffers an impact should be discarded and replaced by a new one.

Keeping a riding helmet fresh through regular cleaning will prevent odours and mould developing inside the headband and ultimately prolong the life of your helmet. It is really important to use cleaning products that are specially formulated for use inside a riding helmet. This helmet should not be dry cleaned, exposed to solvents, or put in the washing machine/dishwasher.

Make no modifications to the helmet.

To view our range of specialist cleaning products click here.